A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Re:Re:Gen 4 Drivers Mat question?
Less
More
- Posts: 1906
- Thank you received: 492
24 May 2024 17:24 #256072
by DrRobin
2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog
Gen 4 Drivers Mat question? was created by DrRobin
My Gen 4 came to me with rubber mats, the drivers side has two holes at the rear with plastic surrounds which are obviously meant to locate on two pins in the Jimny floor. However, my Jimny doesn't have the floor pins or clips and as a result the drivers side mat slides around a bit.
The mats look like these www.glynhopkinpartsonline.co.uk/cdn/shop...024.jpg?v=1633003538
Was it meant to have a couple of fixings fitted in to the floor or are these an after market fitment?
Robin
The mats look like these www.glynhopkinpartsonline.co.uk/cdn/shop...024.jpg?v=1633003538
Was it meant to have a couple of fixings fitted in to the floor or are these an after market fitment?
Robin
2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog
Please Log in or Create an account to join the conversation.
- Roger Fairclough
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 1457
- Thank you received: 210
24 May 2024 17:34 #256073
by Roger Fairclough
Replied by Roger Fairclough on topic Gen 4 Drivers Mat question?
Your rubber mats should have been supplied with two plastic clips that fit onto the seat mounting crossmember and hold the rubber mat firmly in place. This is only for the drivers mat. The passenger mat is slightly different in size and doesn't need the clips.
Roger
Roger
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1906
- Thank you received: 492
24 May 2024 19:48 #256080
by DrRobin
2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog
Replied by DrRobin on topic Gen 4 Drivers Mat question?
Thanks Roger, Do you have these and if so could you snap a quick picture please?
Robin
Robin
2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog
Please Log in or Create an account to join the conversation.
24 May 2024 20:17 #256083
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Gen 4 Drivers Mat question?
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: RumbleAndSway
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1906
- Thank you received: 492
25 May 2024 08:42 #256088
by DrRobin
2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog
Replied by DrRobin on topic Re:Gen 4 Drivers Mat question?
Thanks Martin,
I have the rubber mats as shown in the first picture but the previous owner didn’t fit the clips. Is it possible to get the clips as a separate item or can you buy aftermarket clips?
Robin
I have the rubber mats as shown in the first picture but the previous owner didn’t fit the clips. Is it possible to get the clips as a separate item or can you buy aftermarket clips?
Robin
2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog
Please Log in or Create an account to join the conversation.
25 May 2024 09:45 #256090
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Re:Gen 4 Drivers Mat question?
I don't think they are available separately but I will ask for you
On mine, purchased new from a dealer (but not my usual dealer), the mats were placed in the car and the clips were in a bag in the glovebox.
Sent from my ThinkPhone by motorola using Tapatalk
On mine, purchased new from a dealer (but not my usual dealer), the mats were placed in the car and the clips were in a bag in the glovebox.
Sent from my ThinkPhone by motorola using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
25 May 2024 11:46 #256092
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Re:Gen 4 Drivers Mat question?
Just spoken to our own dealer, they are not available separately but.....
.....he is posting me some he had
.....he is posting me some he had
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1906
- Thank you received: 492
25 May 2024 13:09 #256095
by DrRobin
2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog
Replied by DrRobin on topic Re:Re:Gen 4 Drivers Mat question?
That’s fantastic, let me know how much?
There is definitely no fixings in a bag in the car, mind considering I didn’t get they key for the spare wheel cover, that doesn’t surprise me.
Robin
There is definitely no fixings in a bag in the car, mind considering I didn’t get they key for the spare wheel cover, that doesn’t surprise me.
Robin
2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog
Please Log in or Create an account to join the conversation.
27 May 2024 20:46 #256121
by 300bhpton
Replied by 300bhpton on topic Re:Re:Gen 4 Drivers Mat question?
What an awesome forum and community we have here.Just spoken to our own dealer, they are not available separately but.....
.....he is posting me some he had
Please Log in or Create an account to join the conversation.
31 May 2024 09:20 #256143
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Re:Gen 4 Drivers Mat question?
Dr Robin, free ones have arrived today, will send them on.
I noticed they have a part number stamped in the plastic 75921-76G1
A quick google shows these to be an ordeable item on their own.
I noticed they have a part number stamped in the plastic 75921-76G1
A quick google shows these to be an ordeable item on their own.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1906
- Thank you received: 492
06 Jun 2024 14:45 #256189
by DrRobin
2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog
Replied by DrRobin on topic Re:Re:Gen 4 Drivers Mat question?
Thanks Martin,
Clips arrived today, many thanks. I looked the part number up, SIMS Suzuki sell them at £5.41, just in case anyone else needs them.
I have sent you a donation for your troubles.
They only took seconds to fit as the seat support on the chassis is pre-drilled behind carpet cut outs.
Robin
Clips arrived today, many thanks. I looked the part number up, SIMS Suzuki sell them at £5.41, just in case anyone else needs them.
I have sent you a donation for your troubles.
They only took seconds to fit as the seat support on the chassis is pre-drilled behind carpet cut outs.
Robin
2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog
Please Log in or Create an account to join the conversation.
Time to create page: 0.180 seconds