A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
M13a manual transfer case.
08 Mar 2024 09:46 - 17 Mar 2024 19:13 #254902
by Michael83
M13a manual transfer case. was created by Michael83
Hi is there anyone in Norfolk, Suffolk, Cambridgeshire, Essex able to help me rebuild a m13a manual transfer case please??
I took it to a recommended transmission specialist in Norwich as recommended by many and it's come back with a leaking rear seal and a screaming and clicking rear output shaft bearing.
It had a new chain put in by them that I supplied. I asked them to give whatever it needed, bearings etc. I also supplied the new seals.
I'm not interested in going back to same mechanic and looking for a Suzuki 4x4 tinkerer that actually knows Suzuki stuff.
Please please help I'm not ashamed to say I'm desperate, jimnys as good as dead till this gets sorted.
I took it to a recommended transmission specialist in Norwich as recommended by many and it's come back with a leaking rear seal and a screaming and clicking rear output shaft bearing.
It had a new chain put in by them that I supplied. I asked them to give whatever it needed, bearings etc. I also supplied the new seals.
I'm not interested in going back to same mechanic and looking for a Suzuki 4x4 tinkerer that actually knows Suzuki stuff.
Please please help I'm not ashamed to say I'm desperate, jimnys as good as dead till this gets sorted.
Last edit: 17 Mar 2024 19:13 by Michael83.
Please Log in or Create an account to join the conversation.
- greenmachine
- Offline
- Senior Member
-
Registered
Less
More
- Posts: 62
- Thank you received: 5
08 Mar 2024 11:37 #254907
by greenmachine
Replied by greenmachine on topic M13a manual transfer case.
ive got one the RM72? manual transfer? sat in my donar car. i,m nr scotch corner .
Please Log in or Create an account to join the conversation.
- greenmachine
- Offline
- Senior Member
-
Registered
Less
More
- Posts: 62
- Thank you received: 5
08 Mar 2024 11:40 #254908
by greenmachine
Replied by greenmachine on topic M13a manual transfer case.
bit far sorry. i wrote think you were in Lincs' for some reason!
Please Log in or Create an account to join the conversation.
08 Mar 2024 12:41 #254912
by Michael83
Replied by Michael83 on topic M13a manual transfer case.
I should have said it's got reduction gears and 32 muds so not a standard geared t case.
Appreciate that tho massively.
Appreciate that tho massively.
Please Log in or Create an account to join the conversation.
16 Mar 2024 18:10 #255107
by Michael83
Replied by Michael83 on topic M13a manual transfer case.
Anyone???
Please Log in or Create an account to join the conversation.
17 Mar 2024 14:00 #255120
by Busta
Replied by Busta on topic M13a manual transfer case.
I've got one, I'm near Acle, Norfolk.
Please Log in or Create an account to join the conversation.
17 Mar 2024 19:10 #255126
by Michael83
Replied by Michael83 on topic M13a manual transfer case.
Hi thanks for reply, please message me details. Very much appreciated.
Please Log in or Create an account to join the conversation.
Time to create page: 0.134 seconds