A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
I'm finally coming to the conclusion that my beloved quasar grey is actually less visible to other road users than the avengers helicarrier with the retroreflecors switched on. To this end I am investigating the idea of daytime running lights. Is there a bolt in kit that augments the front fog lights without duplicating them? Gen3.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
You can get replacement LED fog light units that have DRL in them from several places, although most aren’t CE marked.
I did find one set which were CE marked for about £140, but would have to look the link up.
When I looked at the back of my fog lights the bolt heads had rust on them so decided they were not going to come out easily. That’s why I fitted the Ring Lyra LED in the front grilles on my Gen3, about £55-£60. Lyra are approved and sense battery voltage to switch on and off. The also wire in to the position light and dim at night.
I just used a Dremel to cut through the grille, it was fairly straight forward.
Robin
2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog
logo.
