A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Hi all. Looking at my front grille badge it seems to be 2 separate parts. How do I safely get the chrome bit out so that I can wrap it independently before putting it back?
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
I do like your thorough approach, but I just rubbed it down and painted it with a brush in a dabbing motion avoiding brush streaks.
Surprised how good it looks and how long it is since now and no peeling. Will do it to the other badges too. Maybe some day..
If I can jump in on this with a sort of related question.
Are all of the grills on the front the same?
I was pondering swapping out the centre badged one for a plain slatted one, but don't fancy breaking one of mine testing out a theory.
Heat it gently and pry out starting from the very bottom so that any ding won't be visible.
If wrapping, IMHO and own experience, you'll have to do it in three sections, meaning each one of the 3 main sections of the S must get enough vinyl to cover its sides.
I've done the split on the ridges. It will not show up.
Attachment 2023.12.23SSuzukipreto0copy.JPG not found
logo.
