A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Wheel spacers
17 Oct 2023 18:57 #251531
by Zaskar97
Replied by Zaskar97 on topic Wheel spacers
35mm each.
Please Log in or Create an account to join the conversation.
17 Oct 2023 18:59 #251532
by Zaskar97
Replied by Zaskar97 on topic Wheel spacers
They are big jimny ones. Still in the box labelled up, so I think they should fit.
Please Log in or Create an account to join the conversation.
17 Oct 2023 19:22 #251534
by 300bhpton
Replied by 300bhpton on topic Wheel spacers
What do you want to achieve? Spacers will move the rims outboard, exactly the same as running deep dish rims. In theory a wider stance can offer more sideslope stability. They can also potentially allow more steering lock and maybe less rubbing in some areas or allow more room for a wider tyre.
Downsides are going to be potential rubbing in other places. More bump steer. More risk of steering wobble. And increased wear as mentioned by others above.
I run spacers on the front of my Land Rover as I can get full steering lock with fatter tyres. Which is good for competitions. So it is a worthwhile trade off on a vehicle that does relatively low annual mileage.
I don’t however run spacers on my Jimny as there isn’t really the benefits of it. So it comes down to what you want to achieve really.
Downsides are going to be potential rubbing in other places. More bump steer. More risk of steering wobble. And increased wear as mentioned by others above.
I run spacers on the front of my Land Rover as I can get full steering lock with fatter tyres. Which is good for competitions. So it is a worthwhile trade off on a vehicle that does relatively low annual mileage.
I don’t however run spacers on my Jimny as there isn’t really the benefits of it. So it comes down to what you want to achieve really.
Please Log in or Create an account to join the conversation.
17 Oct 2023 19:28 #251535
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Wheel spacers
Not BigJimny, never sold any spacersThey are big jimny ones. Still in the box labelled up, so I think they should fit.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: Zaskar97
Please Log in or Create an account to join the conversation.
18 Oct 2023 18:12 #251564
by Zaskar97
Replied by Zaskar97 on topic Wheel spacers
Apologies, my mistake. The guy said big jimny initially but had another look at them and they are black raptor.
After reading all the advice on here I will give them a miss.
Thanks everyone for the advice.
After reading all the advice on here I will give them a miss.
Thanks everyone for the advice.
Please Log in or Create an account to join the conversation.
Time to create page: 0.128 seconds