A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

G16B engine conversion

More
08 Oct 2023 12:11 #251262 by Daryl631
Hi i have fitted a g16b engine in jimny,after complete rebuild with a rebore,the problem is it runs fine on idle co ok then when revs picked up it runs 8% co and smokes a lot. I have fitted new injectors when i did engine conversion,i think the injectors might be wrong they are grey in colour, can anyone help pls i am at my wits end i can't find injectors anywhere, thanks Daryl

Please Log in or Create an account to join the conversation.

More
08 Oct 2023 12:31 #251265 by Daryl631
Replied by Daryl631 on topic G16B engine conversion
I forgot to mention i am running jimny manifolds and cam, i have replace o2 sensor it fluctuates ok on idle but flatline when revving.

Please Log in or Create an account to join the conversation.

More
09 Oct 2023 16:23 #251309 by Daryl631
Replied by Daryl631 on topic G16B engine conversion
Does anyone know where i can buy the green injectors off a baleno pls.

Please Log in or Create an account to join the conversation.

Time to create page: 0.127 seconds
Joomla template by a4joomla