A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Looking to lift my incoming Jimny LCV and was wondering what lift kit would be the best fit. Just going 40mm, no more than that. Basically it's mainly for visual purposes but I will also be using a roof top tent on it so it will need to be a stiffer set up than stock. I've heard the stock springs and shocks are far too soft anyway, even for normal day to day use. Is this the case?
We are about to test the Pedders lift on our new lcv, if we like it I will be stocking it as well as separate shocks etc.
We have the trailmaster set up on our other gen4 and it's very good but it's now basically impossible to trade with them
Sent from my ThinkPhone by motorola using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
logo.
