A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Tie Rod Ends
03 May 2023 18:26 #248943
by tomcat
Tie Rod Ends was created by tomcat
Some clarification please from the learned members.
Looking to purchase tie rod ends.
My references give 48820-81A00 for RH and 48810-81A00 for LH.
When I go online I find the same fitment given for both OEM numbers.
Is this correct? Thanks.
Looking to purchase tie rod ends.
My references give 48820-81A00 for RH and 48810-81A00 for LH.
When I go online I find the same fitment given for both OEM numbers.
Is this correct? Thanks.
Please Log in or Create an account to join the conversation.
03 May 2023 21:02 #248945
by Abudougal
Replied by Abudougal on topic Tie Rod Ends
I've just ordered a pair and they were right and left handed, I'll snap a pic of the numbers tomorrow for you.
The following user(s) said Thank You: tomcat
Please Log in or Create an account to join the conversation.
04 May 2023 10:15 #248952
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Tie Rod Ends
The "handedness" refers to the threads, which thread they are depends on which way round the rod has been fitted.
The ends are opposite threads so when you rotate the rod to adjust it, both ends move out or in together and the rod changes length.
You have to check the thread on the end you want to change, or just buy a pair if you are sending off and paying postage.
The ends are opposite threads so when you rotate the rod to adjust it, both ends move out or in together and the rod changes length.
You have to check the thread on the end you want to change, or just buy a pair if you are sending off and paying postage.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
04 May 2023 10:39 #248953
by tomcat
Replied by tomcat on topic Tie Rod Ends
Thank you for the comments. Noted.
Please Log in or Create an account to join the conversation.
Time to create page: 0.147 seconds