A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

Upgrading 2 din radio.

More
26 May 2021 12:41 - 26 May 2021 12:51 #235394 by Stefan
Good day fellow Jimny folks.

Me, again.

I want to upgrade my current 2 din radio to a 7" touchscreen one. Will this be fun/ challenging or will I be stripping the entire Jimny to do it?

I am looking at these available locally:

m.takealot.com/double-din-car-multi-medi...AvD_BwE&gclsrc=aw.ds

And this one:
m.takealot.com/4g-7-inch-multi-media-car...AvD_BwE&gclsrc=aw.ds
Anyone did something like this on a 2012 Jimny?
Thanks in advance for any help.
Last edit: 26 May 2021 12:51 by Stefan.

Please Log in or Create an account to join the conversation.

More
26 May 2021 17:07 #235407 by Gadget
Replied by Gadget on topic Upgrading 2 din radio.
I've not replaced a stereo in a Gen3, but based on doing a swap in my Gen4 and plenty of other cars, it's usually just a case of making sure you get the right wiring adapters and fascia trim.

You'll need a wiring adapter to change the OEM wiring to an ISO connection, probably an aerial adapter and whatever fascia/trim pieces are needed for your car. I used this site and they list the following for the 2012 Jimny.

www.dynamicsounds.co.uk/vehicles/Suzuki/Jimny/2012

Please Log in or Create an account to join the conversation.

More
26 May 2021 19:56 #235417 by Stefan
Replied by Stefan on topic Upgrading 2 din radio.
It currently has a Jensen JCD-DD6BT radio installed. Does this one still use OEM? I'll have a look at the site and see where I can find these locally, but it won't be from a dealership right?

Please Log in or Create an account to join the conversation.

  • Lambert
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
26 May 2021 20:12 #235420 by Lambert
Replied by Lambert on topic Upgrading 2 din radio.
That will probably be on iso plugs and therefore relatively easily changed.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
26 May 2021 21:42 #235427 by DrRobin
Replied by DrRobin on topic Upgrading 2 din radio.
I fitted an Xtrons double DIN head unit to my 2011 Jimny, it’s straight forward as the Xtrons have curved corners so fits the Jimny perfectly and the connectors matched up without problem.

I have had a few issues with DAB noise, but an abundance of copper tape and decent earthing sorted that out.

Robin

2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog

Please Log in or Create an account to join the conversation.

Time to create page: 0.158 seconds
Joomla template by a4joomla