A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

Hi All

HWF
New Member
Public

18 Jan 2021 17:21 #231933 by HWF

Replied by HWF on topic Hi All

Does the headlight have condensation or is it starting to fade (common problem) at the top? If its faded you can get a polish and polish it out. Aldi were doing a kit for a few pounds. Sure ebay will do the same.

Please Log in or Create an account to join the conversation.

HWF
New Member
Public

18 Jan 2021 17:23 - 18 Jan 2021 17:23 #231934 by HWF

Replied by HWF on topic Hi All

The headlights went! I had them

Last edit: 18 Jan 2021 17:23 by HWF.

Please Log in or Create an account to join the conversation.

Busta
Offline
Platinum Member
Registered

19 Jan 2021 09:11 #231944 by Busta

Replied by Busta on topic Hi All

For the kingpins typically you only need to replace the bearings (type 30302, available from any bearing supplier) and the small driveshaft seal. Best to get a genuine seal, although bearing suppliers will be able to supply a slightly narrower one that will do the job. The parts should cost around £25/side and fitting time is around an hour.

Please Log in or Create an account to join the conversation.

Time to create page: 0.149 seconds

Hi All

Events Menu