A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Looking for VSV1 and VSV2 solenoids (vacuum system ) on a Mk1 Jimny UK ?
- stoneuk
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
15 Sep 2020 12:12 #228227
by stoneuk
Looking for VSV1 and VSV2 solenoids (vacuum system ) on a Mk1 Jimny UK ? was created by stoneuk
Good afternoon
Can anyone suggest where i can purchase a VSV1 and VSV2 solenoid (vacuum system ) on a Mk1 Jimny ?
Thanks
Can anyone suggest where i can purchase a VSV1 and VSV2 solenoid (vacuum system ) on a Mk1 Jimny ?
Thanks
Please Log in or Create an account to join the conversation.
15 Sep 2020 12:27 #228231
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Looking for VSV1 and VSV2 solenoids (vacuum system ) on a Mk1 Jimny UK ?
Brand new the VSV block is £181. It is in-stock in the UK
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: stoneuk
Please Log in or Create an account to join the conversation.
15 Sep 2020 17:30 #228239
by Busta
Replied by Busta on topic Looking for VSV1 and VSV2 solenoids (vacuum system ) on a Mk1 Jimny UK ?
I'm sure there are plenty of people who have fitted manual hubs who could sell you theirs.
The following user(s) said Thank You: stoneuk
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 9242
- Thank you received: 1854
15 Sep 2020 18:32 #228241
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Looking for VSV1 and VSV2 solenoids (vacuum system ) on a Mk1 Jimny UK ?
I would sell you mine but they're the reason I swapped to manual hubs as they were cheaper than the solenoids.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
The following user(s) said Thank You: stoneuk
Please Log in or Create an account to join the conversation.
16 Sep 2020 19:38 #228269
by Keithy
Replied by Keithy on topic Looking for VSV1 and VSV2 solenoids (vacuum system ) on a Mk1 Jimny UK ?
No eBay APP ID and/or Cert ID defined in Kunena configurationTry ebay?
I'd sell you my spare set but I may need them....
I'd sell you my spare set but I may need them....
Please Log in or Create an account to join the conversation.
Time to create page: 0.153 seconds