A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
New wheels & tyres needed help please
- jackonlyjack
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2966
- Thank you received: 667
17 Apr 2020 17:56 #221165
by jackonlyjack
Replied by jackonlyjack on topic New wheels & tyres needed help please
Your odo will be a little more accurate than it is now.
Please Log in or Create an account to join the conversation.
18 Apr 2020 11:51 - 18 Apr 2020 12:14 #221197
by Brucester
Replied by Brucester on topic New wheels & tyres needed help please
I found these on oponeo.co.uk DOTZ Dakar 7.00x16 5x139.70 ET0.00
Any idea how best to draw a circle round the middle of the 5 studs so i can measure the diameter for the PCD?
Any idea how best to draw a circle round the middle of the 5 studs so i can measure the diameter for the PCD?
Last edit: 18 Apr 2020 12:14 by Brucester. Reason: Additional info
Please Log in or Create an account to join the conversation.
- jackonlyjack
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2966
- Thank you received: 667
18 Apr 2020 13:30 #221205
by jackonlyjack
Replied by jackonlyjack on topic New wheels & tyres needed help please
Not sure why you have this question Pal
suzuki is 5x139.7 stud pattern
suzuki is 5x139.7 stud pattern
Please Log in or Create an account to join the conversation.
19 Apr 2020 07:35 #221255
by Brucester
Replied by Brucester on topic New wheels & tyres needed help please
Many thanks, i didn't know and was trying to find out to make sure the rims i found were correct.
Please Log in or Create an account to join the conversation.
- MrPunch
- Visitor
-
Public
19 Apr 2020 07:52 - 19 Apr 2020 07:53 #221258
by MrPunch
Replied by MrPunch on topic New wheels & tyres needed help please
Hi Brucester,
How are you getting on with this? I am in the exact Same boat probably way behind the knowledge you have gained here.
Please can you help me a bit I bought the wife a 59plate JLS Plus and she would like some chunkier tyres but she doesn’t want them to be wider than the body too much. Mentioned getting the alloys that are poor re-coated and buy tyres or is the way forward by a full set not sure how to put pictures on here to give an example of the type of effect she would like .
How are you getting on with this? I am in the exact Same boat probably way behind the knowledge you have gained here.
Please can you help me a bit I bought the wife a 59plate JLS Plus and she would like some chunkier tyres but she doesn’t want them to be wider than the body too much. Mentioned getting the alloys that are poor re-coated and buy tyres or is the way forward by a full set not sure how to put pictures on here to give an example of the type of effect she would like .
Last edit: 19 Apr 2020 07:53 by MrPunch.
Please Log in or Create an account to join the conversation.
- MrPunch
- Visitor
-
Public
19 Apr 2020 07:58 #221259
by MrPunch
Replied by MrPunch on topic New wheels & tyres needed help please
Please Log in or Create an account to join the conversation.
Time to create page: 0.144 seconds