No eBay APP ID and/or Cert ID defined in Kunena configurationNo eBay APP ID and/or Cert ID defined in Kunena configuration
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
[img
logo.

Anyone running on bike carbs

More
03 Jun 2019 16:23 #209543 by jackonlyjack
No eBay APP ID and/or Cert ID defined in Kunena configurationAnyone running on bike carbs was created by jackonlyjack
No eBay APP ID and/or Cert ID defined in Kunena configuration
My Jimny
www.bigjimny.com/index.php/forum?view=topic&catid=8&id=60814

www.youtube.com/channel/UCfJa3cPPDZYGwkWr0rvu8ug

Please Log in or Create an account to join the conversation.

More
03 Jun 2019 17:38 #209546 by Riccy
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by Riccy on topic Anyone running on bike carbs
:ohmy: Interesting. Sniper or Keithy is your source of knowledge for these things I suspect.

Maybe that the ECU is the hardest part from looking at it on their ebay listing.
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

More
03 Jun 2019 18:12 #209548 by jackonlyjack
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by jackonlyjack on topic Anyone running on bike carbs
No eBay APP ID and/or Cert ID defined in Kunena configurationAlso found this which would be an easier option maybe
My Jimny
www.bigjimny.com/index.php/forum?view=topic&catid=8&id=60814

www.youtube.com/channel/UCfJa3cPPDZYGwkWr0rvu8ug

Please Log in or Create an account to join the conversation.

More
03 Jun 2019 18:16 #209549 by Keithy
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by Keithy on topic Anyone running on bike carbs
I don't think the ECU would be a problem....just let it do the ignition and it'll blissfully think it's injecting fuel.

Might be a problem making the whole affair watertight?

I bought an inlet flange for the G13 from him a few years back.......he's a petrolhead......and we know they can be crazy....

Buy a set of carbs Jack......want me to save you an inlet flange?

Please Log in or Create an account to join the conversation.

More
03 Jun 2019 18:19 #209550 by Keithy
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by Keithy on topic Anyone running on bike carbs
No eBay APP ID and/or Cert ID defined in Kunena configuration

jackonlyjack wrote: Also found this which would be an easier option maybe


I thought I was the mad one....60mm will do me with a supercharger and a turbo :D

Please Log in or Create an account to join the conversation.

More
03 Jun 2019 18:25 #209553 by jackonlyjack
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by jackonlyjack on topic Anyone running on bike carbs
Will the G flange fit an M
My Jimny
www.bigjimny.com/index.php/forum?view=topic&catid=8&id=60814

www.youtube.com/channel/UCfJa3cPPDZYGwkWr0rvu8ug

Please Log in or Create an account to join the conversation.

More
03 Jun 2019 18:31 #209555 by Keithy
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by Keithy on topic Anyone running on bike carbs

jackonlyjack wrote: Will the G flange fit an M

No......I have a couple of manifolds in the scrap pile......chop and weld....M13 manifold?

Please Log in or Create an account to join the conversation.

More
03 Jun 2019 18:39 #209557 by jackonlyjack
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by jackonlyjack on topic Anyone running on bike carbs
Let me get this wedding malarkey over and done
And i will pop upt north to talk will possibly bring Sniper with me
He likes performance stuff ;)
My Jimny
www.bigjimny.com/index.php/forum?view=topic&catid=8&id=60814

www.youtube.com/channel/UCfJa3cPPDZYGwkWr0rvu8ug
The following user(s) said Thank You: Keithy, sniper

Please Log in or Create an account to join the conversation.

  • Daniel30
  • Visitor
  • Visitor
    Public
03 Jun 2019 19:57 #209564 by Daniel30
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by Daniel30 on topic Anyone running on bike carbs
Get it done before jackonlyjack there will be no chance afterwards :evil: :whistle: :lol:

Please Log in or Create an account to join the conversation.

More
04 Jun 2019 16:38 #209600 by Riccy
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by Riccy on topic Anyone running on bike carbs
I made a simple CAD drawing of the Jimny standard throttle body and sent to someone from this forum who was going to make an adapter to use the rav4 throttle body a while ago.

It shows the exact spacing and size of the jimny inlet manifold which might be useful...

Its a PDF file (attached), but I dont know if the forum supports it...
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus
Attachments:

Please Log in or Create an account to join the conversation.

More
04 Jun 2019 17:54 #209607 by Keithy
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by Keithy on topic Anyone running on bike carbs
Here's the manifold drawing....provided by Jenvey.

This browser does not support PDFs. Please download the PDF to view it: Download PDF



No pillar drill Richard?

Please Log in or Create an account to join the conversation.

More
04 Jun 2019 18:33 #209608 by Quasi
No eBay APP ID and/or Cert ID defined in Kunena configurationReplied by Quasi on topic Anyone running on bike carbs

Riccy wrote: I made a simple CAD drawing of the Jimny standard throttle body and sent to someone from this forum who was going to make an adapter to use the rav4 throttle body a while ago.


:blush: Sorry Riccy, that someone was me :blush:
The ally plate is all set up ready to finish off but each time I try and get near the mill something else crops up. I'll try and get my butt in gear and finish it this weekend.

Please Log in or Create an account to join the conversation.

Time to create page: 0.202 seconds
Joomla template by a4joomla