A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Kingpin bearings replacement - any others to replace while at it?
13 May 2018 08:32 #192640
by farshi
Hi guys,
I want to replace my kingpins bearings in order to fix the death wobble on my 2010 jimny.
What else should I replace other than the bearings themselves?
Thanks,
Omri
I want to replace my kingpins bearings in order to fix the death wobble on my 2010 jimny.
What else should I replace other than the bearings themselves?
Thanks,
Omri
The following user(s) said Thank You: Max Headroom
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2966
- Thank you received: 667
13 May 2018 08:56 #192641
by jackonlyjack
Replied by jackonlyjack on topic Kingpin bearings replacement - any others to replace while at it?
Just buy the kit
2x bearings
oil seal
swivel dust seal
also buy some waterproof grease and spray all the bolts with wd40
I did mine last week and the abs sensor bolt snapped off
so i would advise spraying for a couple of days before you start
Jack
2x bearings
oil seal
swivel dust seal
also buy some waterproof grease and spray all the bolts with wd40
I did mine last week and the abs sensor bolt snapped off
so i would advise spraying for a couple of days before you start
Jack
The following user(s) said Thank You: Max Headroom
Please Log in or Create an account to join the conversation.
- Max Headroom
-
- Offline
- Banned
-
Registered
- OPEN AIR MOTORING... 93 MILLION MILES OF HEADROOM
Less
More
- Posts: 1091
- Thank you received: 217
13 May 2018 17:51 - 13 May 2018 17:52 #192656
by Max Headroom
IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS
Replied by Max Headroom on topic Kingpin bearings replacement - any others to replace while at it?
That was a good question actually, Farshi; I'm about to set about mine in a week or so!
And thank you too, Jackonlyjack
And thank you too, Jackonlyjack
IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS
Last edit: 13 May 2018 17:52 by Max Headroom.
Please Log in or Create an account to join the conversation.
14 May 2018 05:59 #192673
by farshi
Replied by farshi on topic Kingpin bearings replacement - any others to replace while at it?
No need to replace the bearings sleeve and the kingpins?
The oil seal is the one the sits inside the axle?
The oil seal is the one the sits inside the axle?
Please Log in or Create an account to join the conversation.
14 May 2018 06:00 #192674
by Bosanek
Replied by Bosanek on topic Kingpin bearings replacement - any others to replace while at it?
I recently significantly expanded the wiki article on
changing the king pin bearings
with various information, so I suggest that you read it too.
Using a proper heavy-duty grease is essential to achieving the longevity of your newly installed king pin bearings.
Using a proper heavy-duty grease is essential to achieving the longevity of your newly installed king pin bearings.
Please Log in or Create an account to join the conversation.
14 May 2018 13:33 #192679
by farshi
Replied by farshi on topic Kingpin bearings replacement - any others to replace while at it?
I read the article and it's great! thanks for putting the effort to write it.
For the bearing lubrication, can I use a graphite grease (grey/black)?
How mush grease should is needed inside the steering swivel?
For the bearing lubrication, can I use a graphite grease (grey/black)?
How mush grease should is needed inside the steering swivel?
Please Log in or Create an account to join the conversation.
Time to create page: 0.147 seconds