A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
ABS sensors
28 May 2017 17:27 #181611
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic ABS sensors
The plastic bits are not available separately, but the whole ABS assembly is £105 in the store at the moment (non-Suzuki)
I have never had to do the code detection on an ABS Jimny but the manual describes the connector as E70-BLUE
And the diagnostic mode is achieved by linking across the terminals as shown, the ABS light then flashes a code to you
I have never had to do the code detection on an ABS Jimny but the manual describes the connector as E70-BLUE
And the diagnostic mode is achieved by linking across the terminals as shown, the ABS light then flashes a code to you
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- Justin83
- New Member
-
Public
- larnach
- Topic Author
- New Member
-
Public
- Justin83
- New Member
-
Public
Time to create page: 0.167 seconds