A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
What did the postman bring today
- funkyjimny
-
- Offline
- Moderator
-
Registered
- 2004 jimny soft top, factory hardtop, ARB bumper
08 Jun 2015 17:44 #145658
by funkyjimny
Kirky, sorry for delay, been off laning for a few days! Yes they are Jimnybits ones, I'm impressed with them so far, not hot them fitted yet, maybe next week, got far too many bits to fit at the minute !
Gary
Replied by funkyjimny on topic What did the postman bring today
kirkynut wrote:
funkyjimny wrote: Some new rear radius arms, ORA +3". New plus 5" front shocks and springs, new prop spacer, high lift jack. Oh, and these
Tell me about these Rocksliders!
Kirkynut
Kirky, sorry for delay, been off laning for a few days! Yes they are Jimnybits ones, I'm impressed with them so far, not hot them fitted yet, maybe next week, got far too many bits to fit at the minute !
Gary
Please Log in or Create an account to join the conversation.
- the_goshawker
- New Member
-
Public
13 Jun 2015 09:07 #145911
by X8GGY
Replied by X8GGY on topic What did the postman bring today
Postie just brought me a BigJimny breather kit... destined to go on the EX-Jimny buggy now the transfer box is in, with a BigJimny breather tapped into it...
Thanks Martin
Thanks Martin
Please Log in or Create an account to join the conversation.
27 Jun 2015 09:39 #146679
by Mescort
Zanfi + Jimnybits
G16B, Doug Thorley Header, Trail-Gear 6,5:1 Transfer, Front 28 Degree CV propShaft, Rockwatt crawler box kit, Zanfi 2" springs, Zanfi 10° + 10mm Front Radius arm, Caster Correction Bushes rear, Adjustable Panhard, Bilstein 5100 Shocks, Dotz dakar 15x7, goodyear duratrac 235x75x15, warn M6000
Replied by Mescort on topic What did the postman bring today
Zanfi + Jimnybits
G16B, Doug Thorley Header, Trail-Gear 6,5:1 Transfer, Front 28 Degree CV propShaft, Rockwatt crawler box kit, Zanfi 2" springs, Zanfi 10° + 10mm Front Radius arm, Caster Correction Bushes rear, Adjustable Panhard, Bilstein 5100 Shocks, Dotz dakar 15x7, goodyear duratrac 235x75x15, warn M6000
Please Log in or Create an account to join the conversation.
27 Jun 2015 11:28 - 27 Jun 2015 11:29 #146689
by X8GGY
Replied by X8GGY on topic What did the postman bring today
A bit from BigJimny and a bit from JimnyBits -
Front rebuild kit!
Front wheel bearings and seals, new kingpins and bearings, axle seals, ball seals, waterproof grease, track rod ends (already got some 'in stock' too), and new nuts for them too...
I had terrible death wobble on day two of your Lake District weekend trip as the balljoint on the track rod end connected to the pitman steering arm is shot, and after swapping the rear wheel bearings recently, and given the Jim has just turned 50k and had 16 greenlaning trips, so I thought it wise preventative maintenance to change the front wheel bearings, so I figured I might as well get everything in stock ready for a complete rebuild of the front axle and steering... might not use everything during the rebuild but at least I've got it if I needed it, and if not the unused components can sit on the spares shelf until they ARE needed...
It's supposed to rain tomorrow though? Might have to have a lie-in for a change...
Front rebuild kit!
Front wheel bearings and seals, new kingpins and bearings, axle seals, ball seals, waterproof grease, track rod ends (already got some 'in stock' too), and new nuts for them too...
I had terrible death wobble on day two of your Lake District weekend trip as the balljoint on the track rod end connected to the pitman steering arm is shot, and after swapping the rear wheel bearings recently, and given the Jim has just turned 50k and had 16 greenlaning trips, so I thought it wise preventative maintenance to change the front wheel bearings, so I figured I might as well get everything in stock ready for a complete rebuild of the front axle and steering... might not use everything during the rebuild but at least I've got it if I needed it, and if not the unused components can sit on the spares shelf until they ARE needed...
It's supposed to rain tomorrow though? Might have to have a lie-in for a change...
Last edit: 27 Jun 2015 11:29 by X8GGY.
Please Log in or Create an account to join the conversation.
Time to create page: 0.326 seconds