Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
What did the postman bring today
- jackonlyjack
- Offline
- Platinum Member
-
Registered
- Posts: 2955
- Thank you received: 663
Please Log in or Create an account to join the conversation.
- Probablynotfrank
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
Probablynotfrank wrote: It's not LR Challenge it's Xshock Dakar, comes from Poland.
These will mount the SJ transfer box but it doesn't provide any guard to protect it.
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Please Log in or Create an account to join the conversation.
- Posts: 760
- Thank you received: 225
I started out with nothing & still have most of it left
Please Log in or Create an account to join the conversation.
- Posts: 9048
- Thank you received: 1811
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- Posts: 1934
- Thank you received: 554
mlines wrote: Parts for the next BigJimny featured upgrade.....
Nice Martin! are they the diesel vented discs and vitara calipers? What carriers will be used?
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- Posts: 1934
- Thank you received: 554
mlines wrote: Yes they are, however carriers are current proving to be an issue. Trawling around the internet, contacted a number of breakers without much success.
I found the correct donor car in a scrap yard in Carlisle a while ago. It was a LWB vitara MK1, but it looked like it had been at the bottom of the sea for most of its life. I think it was a very early one. It was the only MK1 with vented discs from the others I saw there. MK2 mostly seem to have vented but are the wrong offset to work as far as i've seen.
Might be worth messaging Keith Phillips as i think he might have made some in the past?
I have also been looking at front brembo calipers from a renault megane 225, these look simpler to make a mount for but might be too much for the master cylinder to run.
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Please Log in or Create an account to join the conversation.