A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
What did you do to your jimny today?
- fast forward
- Offline
- Elite Member
-
Registered
Less
More
- Posts: 280
- Thank you received: 7
17 Feb 2013 21:01 #62927
by fast forward
if you cant go round it go over it ! or vice versa ?
Replied by fast forward on topic Re: What did you do to your jimny today
got my vac hubs working again and changed oils in the diffs / gearbox /transfer box , then gave it a good wash !
if you cant go round it go over it ! or vice versa ?
Please Log in or Create an account to join the conversation.
- GuardianAngel
- Visitor
-
Public
17 Feb 2013 21:23 #62938
by GuardianAngel
I would be very interested in seeing some photos of your work during and after if you get time. My boot floor needs work and am considering having a full replacement done with thicker steel.
Replied by GuardianAngel on topic What did you do to your jimny today
adamjimny wrote:
Smoggy wrote: What do you mean Adam when you have put hd. What have you done?
body panels are roughly 1mm thick steel but im cutting out all the rear floor and putting in 3mm plate which will be loads stronger. same with front light/body mounts and box section part on front. should be a lot stronger for storage etc to be built onto
I would be very interested in seeing some photos of your work during and after if you get time. My boot floor needs work and am considering having a full replacement done with thicker steel.
Please Log in or Create an account to join the conversation.
- adamjimny
- Visitor
-
Public
17 Feb 2013 21:47 #62947
by adamjimny
Replied by adamjimny on topic What did you do to your jimny today
ill take loads of photos but bear in mind i dont run rear seats and never will......you need the curve of the rear floor for rear seats
Please Log in or Create an account to join the conversation.
- GuardianAngel
- Visitor
-
Public
17 Feb 2013 21:52 #62953
by GuardianAngel
Neither do I
Replied by GuardianAngel on topic Re: What did you do to your jimny today
adamjimny wrote: ill take loads of photos but bear in mind i dont run rear seats and never will......you need the curve of the rear floor for rear seats
Neither do I
Please Log in or Create an account to join the conversation.
- JivingDaddy
- Visitor
-
Public
19 Feb 2013 15:58 #63175
by JivingDaddy
Replied by JivingDaddy on topic Re: What did you do to your jimny today
Finally silenced that rattling heat shield on the cat (couldn't remove it, so used a 99p exhaust bandage. Pukka).
So, that's the annoying noise from under the car dealt with, now to the annoying noise from the passenger seat! :laugh:
So, that's the annoying noise from under the car dealt with, now to the annoying noise from the passenger seat! :laugh:
Please Log in or Create an account to join the conversation.
- Tadpole
- Visitor
-
Public
19 Feb 2013 16:31 #63183
by Tadpole
Replied by Tadpole on topic What did you do to your jimny today
Gave mine a little pat & said ‘don’t be afraid it’s only an MOT’.
‘The nice man will look after you on Thursday fitting you new Discs & Pads, oil & filter may even have new spark plugs’
The smile was worth it .........
‘The nice man will look after you on Thursday fitting you new Discs & Pads, oil & filter may even have new spark plugs’
The smile was worth it .........
Please Log in or Create an account to join the conversation.
Time to create page: 0.423 seconds