BigJimny Store
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
[img
logo.

What did you do to your jimny today?

  • JimnyDan
  • Visitor
  • Visitor
    Public
12 Feb 2013 22:01 #62305 by JimnyDan
Replied by JimnyDan on topic What did you do to your jimny today

GuardianAngel wrote: Stuck one of these in the J today to try and get rid of the bloody moisture that is not helping the rust problem in my boot floor :angry:

www.amazon.co.uk/dp/B009M93THQ

Let us know how it works out please, might have to get one for mine!

Please Log in or Create an account to join the conversation.

  • GuardianAngel
  • Visitor
  • Visitor
    Public
12 Feb 2013 23:11 #62333 by GuardianAngel
Replied by GuardianAngel on topic Re: What did you do to your jimny today

JimnyDan wrote:

GuardianAngel wrote: Stuck one of these in the J today to try and get rid of the bloody moisture that is not helping the rust problem in my boot floor :angry:

www.amazon.co.uk/dp/B009M93THQ

Let us know how it works out please, might have to get one for mine!


Will do. Got mostly good reviews and only a tenner so worth a shot.

Please Log in or Create an account to join the conversation.

  • GuardianAngel
  • Visitor
  • Visitor
    Public
16 Feb 2013 22:04 #62821 by GuardianAngel
Replied by GuardianAngel on topic Re: What did you do to your jimny today
Fitted drivers side pads and new disk. Noticed a lot of play in the hub so probably the bearings have gone. Could explain my brake problem (wobble pushing pads apart).

Then took over an hour to Dremel off the rounded nut which meant I could fit the new rear cylinder :mad:

Just the rear shoes to fit and rebuilding of brake lines to go.

Please Log in or Create an account to join the conversation.

  • adamjimny
  • Visitor
  • Visitor
    Public
17 Feb 2013 00:16 #62830 by adamjimny
Replied by adamjimny on topic Re: What did you do to your jimny today
Started the big dismantle for the body swap and removed my home made bumper as im picking up a OrA one tomorrow....maybe even a winch if there cheap and who knows what else.....could do with a proper tjm style snorkle

Sent from my GT-I9300 using Tapatalk 2

Please Log in or Create an account to join the conversation.

  • supergaz
  • Visitor
  • Visitor
    Public
17 Feb 2013 08:21 #62834 by supergaz
Replied by supergaz on topic Re: What did you do to your jimny today

adamjimny wrote: Started the big dismantle for the body swap and removed my home made bumper as im picking up a OrA one tomorrow....maybe even a winch if there cheap and who knows what else.....could do with a proper tjm style snorkle

Sent from my GT-I9300 using Tapatalk 2


Give me a shout if you need any help, i'm off the first full week of March so could pop over in the tooled up works van.

Please Log in or Create an account to join the conversation.

  • adamjimny
  • Visitor
  • Visitor
    Public
17 Feb 2013 08:33 #62835 by adamjimny
Replied by adamjimny on topic What did you do to your jimny today
might take you up on that pal got some more welding to do on hardtop body yet but it will be an upgrade aswell as rust erradicating ha
hd front end and light mounts and hd rear floor perfectly flat

Please Log in or Create an account to join the conversation.

Time to create page: 0.522 seconds
Joomla template by a4joomla