SJ mini prop for sale

Just changed over my mini prop as I was using it with 40mm of spacers
I think it was from a SJ413, My new one is from a samurai and is about an inch longer and so now I'm only using a 15mm prop spacer
I have been using it with my rocklobster fitted to ORA transfer box mounts.

Its the shorter dirtier one in the photos









This picture shows where it was occasionally rubbing the gearbox mount due to 40mm of spacers.

Just PM me a sensible offer

Gaz how long are each of the props end to end cos I have mine to fit which I bought off ebay.

Not sure if il need spacers and what size yet til I fit them up with my rocklobster. Cheers.

The clean one is a samurai prop, the dirty shorter one is I believe to be a 413, I can measure the old one tomorrow, If I forget just shout out on here

With the samurai prop I needed 15mm spacer
With the 413? prop I needed 25+15mm spacer
all the bolt holes were the same diameter which fitted to my samurai flanges.

how come you need a spcer

Smoggy wrote: Gaz how long are each of the props end to end cos I have mine to fit which I bought off ebay.

Not sure if il need spacers and what size yet til I fit them up with my rocklobster. Cheers.

My old prop is 38cm Nose to tail

suzuki jimny fella wrote: how come you need a spcer

Without the 15mm Spacer there is to much play between the gearbox and input flange.

is this because of the mount you got fella

suzuki jimny fella wrote: is this because of the mount you got fella

Probably, different mounts seem to mount the transferbox slightly different.