A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
jimny hubs
- Brooem
- Topic Author
- Visitor
-
Public
- codpiece76
- Visitor
-
Public
24 Feb 2012 22:01 #34157
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Re: jimny hubs
There is a thread on here somewhere, but just undo the bolts, pull them off, poke your finger inside, wiggle and pull and the inner splined bit will move outwards and lock the hub, then carefully replace, having disconnected the hoses so they don't come off again.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
- Brooem
- Topic Author
- Visitor
-
Public
- Johnniehec
-
- Offline
- Platinum Member
-
Registered
- Brooem
- Topic Author
- Visitor
-
Public
- Brooem
- Topic Author
- Visitor
-
Public
26 Feb 2012 07:17 #34236
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Re: jimny hubs
The light is supposed to flash if the pipes are disconnected.
The transfer box will be in 4wd though, so with the hubs locked manually it will work.
If you block all the pipes by pushing small bolts into the ends the light won't flash, and dirt wont get into the pipes.
The transfer box will be in 4wd though, so with the hubs locked manually it will work.
If you block all the pipes by pushing small bolts into the ends the light won't flash, and dirt wont get into the pipes.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
Time to create page: 0.146 seconds