A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
kingpin bearings
- rhondda jimny
- Topic Author
- Visitor
-
Public
- supergaz
- Visitor
-
Public
05 Feb 2012 13:55 #32733
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re: kingpin bearings
The C.V joint itself should have around 100ml. I usually give the rest a generous dollop but you should not overfill as it will expand with the heat and squeeze out of the joint or wreck the joint through Hydraulic action, you need some air in there.
I can recommend this......
www.bigjimny.com/store/index.php/service...of-grease/p_130.html
I can recommend this......
www.bigjimny.com/store/index.php/service...of-grease/p_130.html
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- rhondda jimny
- Topic Author
- Visitor
-
Public
- wanderinstar
- Visitor
-
Public
- wanderinstar
- Visitor
-
Public
05 Feb 2012 15:46 - 05 Feb 2012 15:47 #32754
by wanderinstar
Replied by wanderinstar on topic Re: kingpin bearings
Make sure you get it well into the bearings. Otherwise this will happen
The bottom ,rusty, one in the photo was out of the bottom.
The bottom ,rusty, one in the photo was out of the bottom.
Last edit: 05 Feb 2012 15:47 by wanderinstar.
Please Log in or Create an account to join the conversation.
- rhondda jimny
- Topic Author
- Visitor
-
Public
- rhondda jimny
- Topic Author
- Visitor
-
Public
- rhondda jimny
- Topic Author
- Visitor
-
Public
- rhondda jimny
- Topic Author
- Visitor
-
Public
11 Feb 2012 13:55 #33257
by rhondda jimny
Replied by rhondda jimny on topic Re: kingpin bearings
this is what i got back .
Please Log in or Create an account to join the conversation.
- rhondda jimny
- Topic Author
- Visitor
-
Public
Time to create page: 0.169 seconds