Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
rocklobster box on difflock, any good??
- r_ogilvy
- Topic Author
- Visitor
-
Public
forum.difflock.com/ads_item.php?id=15333
Please Log in or Create an account to join the conversation.
I think Rockwatt puts a mark on the box to identify it, so it might be worth asking if there is an identifier and then checking with Rockwatt (on this forum) if its the real deal.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
scottishmudclub.com
Please Log in or Create an account to join the conversation.
- r_ogilvy
- Topic Author
- Visitor
-
Public
what else will i need, mounts, props ect? so i can work out how much the lot will cost
Please Log in or Create an account to join the conversation.
You will need props and a mounting kit, but with the hard bit safe in your garage you can worry about these later.
If you then change your mind then you can sell it on.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- r_ogilvy
- Topic Author
- Visitor
-
Public
thanks
Please Log in or Create an account to join the conversation.
- aniesigh
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Johnniehec
- Offline
- Platinum Member
-
Registered
- Posts: 691
- Thank you received: 56
John.
On the 8th Day God made the LandRover -
On the 9th day he swapped it for a Jimny.
Please Log in or Create an account to join the conversation.
- Rockwatt
- Visitor
-
Public
Not really suitable for the road as the high box is 1:1 so you would loose the use of 4th and 5th gear on the road !Johnniehec wrote: The dude selling it says he's changed to a Hilux transfer box, has anyone on here done that conversion? is it a viable option now SJ boxes are getting scarce???
John.
To run a strait through t/box you would need something like 5.7:1 diffs depending on the size of tire.
And yes I did rebuild the above box for jerry.
Please Log in or Create an account to join the conversation.
- Smoggy
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- supergaz
- Visitor
-
Public
I'd link it but im on my phone. Looks like that box will need some flanges.
Please Log in or Create an account to join the conversation.
- adamjimny
- Visitor
-
Public
Cant miss it at the price as i have all flanges props etc already.
As soon as he sends details of his paypal for me to pay him a deposit i can make arrangements to collect it from him
Sorry again but as you will learn you really have to be quick to snap up these lower ratio transfer box's.
Iv been lookibg for ages but wanted lower than rocklobster but the rock crawler seemed a little too low and this box was perfect ratio for my needs
Sent from my GT-I9100 using Tapatalk
Please Log in or Create an account to join the conversation.