A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
[img
logo.

wheel arches

  • oxford_bloke
  • Topic Author
  • Visitor
  • Visitor
    Public
18 Mar 2011 18:44 #13558 by oxford_bloke
wheel arches was created by oxford_bloke
Hi guys, finally got rubber fitted to my truck today (235/85/16) and now i need to do trim all the arches. im not going to put the plastic ones back onto the arches, so any other ideas i was looking at some kind of rubber but don't know how I would fix it to the arch.

any ideas welcome

tom

Please Log in or Create an account to join the conversation.

  • vitara_mad
  • Visitor
  • Visitor
    Public
18 Mar 2011 19:25 #13561 by vitara_mad
Replied by vitara_mad on topic Re: wheel arches
you could fit the +2" landrover arches adamjimny has done this & it looks well

Please Log in or Create an account to join the conversation.

  • gazert
  • Visitor
  • Visitor
    Public
18 Mar 2011 19:41 #13563 by gazert
Replied by gazert on topic Re: wheel arches

vitara_mad wrote: you could fit the +2" landrover arches adamjimny has done this & it looks well

I have just put 10,5 31x15 on mine and need arches but those defender arches are stupid money!!!
sorry to hi jack. Any one got any other ideas?

Please Log in or Create an account to join the conversation.

  • oxford_bloke
  • Topic Author
  • Visitor
  • Visitor
    Public
18 Mar 2011 19:59 #13564 by oxford_bloke
Replied by oxford_bloke on topic Re: wheel arches
i was thinking perhaps the strip that goes on the side of a boat might do it. but the problem lies with the single skin wing. i quite liked the look of the KAP wings but i think one big knock and they would have had it. some kind of right angled rubber might do it but trying to find some is proving tricky.

Please Log in or Create an account to join the conversation.

  • darthloachie
  • Visitor
  • Visitor
    Public
18 Mar 2011 22:51 #13566 by darthloachie
Replied by darthloachie on topic Re: wheel arches
No eBay APP ID and/or Cert ID defined in Kunena configurationNo eBay APP ID and/or Cert ID defined in Kunena configuration

gazert wrote:

vitara_mad wrote: you could fit the +2" landrover arches adamjimny has done this & it looks well

I have just put 10,5 31x15 on mine and need arches but those defender arches are stupid money!!!
sorry to hi jack. Any one got any other ideas?


here you go

Please Log in or Create an account to join the conversation.

  • trextr7monkey
  • Visitor
  • Visitor
    Public
18 Mar 2011 23:10 #13568 by trextr7monkey
Replied by trextr7monkey on topic Re: wheel arches
We have made right angle ABS plastic wing extensions (not on a Jimny) by bending a strip over a hot wire bender, the ends can be rounded off and some U trim applied it is delightful stuff to work with and can be shaped ith a hot air gun, too. Fastened on with large rivets
i129.photobucket.com/albums/p211/trextr7...0pieces/S4010128.jpg


i129.photobucket.com/albums/p211/trextr7...0pieces/S4010130.jpg

this shows front and back extensions

i129.photobucket.com/albums/p211/trextr7...y/ninja/S3400036.jpg

hth
Mike

Please Log in or Create an account to join the conversation.

  • biggaz
  • Visitor
  • Visitor
    Public
18 Mar 2011 23:29 #13570 by biggaz
Replied by biggaz on topic Re: wheel arches

trextr7monkey wrote: We have made right angle ABS plastic wing extensions (not on a Jimny) by bending a strip over a hot wire bender, the ends can be rounded off and some U trim applied it is delightful stuff to work with and can be shaped ith a hot air gun, too. Fastened on with large rivets
i129.photobucket.com/albums/p211/trextr7...0pieces/S4010128.jpg


i129.photobucket.com/albums/p211/trextr7...0pieces/S4010130.jpg

this shows front and back extensions

i129.photobucket.com/albums/p211/trextr7...y/ninja/S3400036.jpg

hth
Mike


That looks superb!

Please Log in or Create an account to join the conversation.

  • gazert
  • Visitor
  • Visitor
    Public
19 Mar 2011 00:54 #13579 by gazert
Replied by gazert on topic Re: wheel arches
No eBay APP ID and/or Cert ID defined in Kunena configurationNo eBay APP ID and/or Cert ID defined in Kunena configuration

darthloachie wrote:

gazert wrote:

vitara_mad wrote: you could fit the +2" landrover arches adamjimny has done this & it looks well

I have just put 10,5 31x15 on mine and need arches but those defender arches are stupid money!!!
sorry to hi jack. Any one got any other ideas?


here you go


That ain't wide enough. Thanks Gaz

Please Log in or Create an account to join the conversation.

  • oxford_bloke
  • Topic Author
  • Visitor
  • Visitor
    Public
19 Mar 2011 06:33 #13580 by oxford_bloke
Replied by oxford_bloke on topic Re: wheel arches
cheers for the response guys

but the problem lies with the fact a jimny wing is only about 2 or 3mm thick and with the plastic inner arches removed it leaves a big void under the wheel arch.

so maybe if i made some L shaped brackets to fit the rubber it may work.

any other ideas are very welcome

cheers

Please Log in or Create an account to join the conversation.

  • dave t
  • Visitor
  • Visitor
    Public
19 Mar 2011 11:10 #13605 by dave t
Replied by dave t on topic Re: wheel arches
[IMG

you could do what i did with belt rubber just make it as wide as you want very strong and stiff it would cope withe been stuck out a foot no problem, bolted to the inside of the arches,then sealed with gasket sealent atb dave.

Please Log in or Create an account to join the conversation.

Time to create page: 0.154 seconds
Joomla template by a4joomla