A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
oopps jimny fell over
- a18suf
- Topic Author
- New Member
-
Public
- bertbuckie
- New Member
-
Public
30 Jan 2011 17:42 #10646
by bertbuckie
Replied by bertbuckie on topic Re: oopps jimny fell over
Exactly what I would do, should work fine if its plastic welded rightadamjimny wrote: cut out a square piece removing broken parts then cut another piece of plastic to fit a smidge bigger and melt it to join then smear with araldite to seal will do for time being maybe even ever
Please Log in or Create an account to join the conversation.
- adamjimny
- New Member
-
Public
- a18suf
- Topic Author
- New Member
-
Public
- bertbuckie
- New Member
-
Public
30 Jan 2011 17:48 #10653
by bertbuckie
Replied by bertbuckie on topic Re: oopps jimny fell over
more plastic weld lol
honestly, you should be able to reseal it easily enough.
I plastic welded my karcher high pressure piston housing with some tie wraps donated as plastic..... its still holding yet and thats high pressure
honestly, you should be able to reseal it easily enough.
I plastic welded my karcher high pressure piston housing with some tie wraps donated as plastic..... its still holding yet and thats high pressure
Please Log in or Create an account to join the conversation.
Time to create page: 0.219 seconds