Are you building a Mud Monster or a Pavement Princess??
If so you can have your own thread in this section.
This section on other websites has led to arguments and contention. People are posting pictures of their pride and joy and therefore CONSTRUCTIVE comments only please!
make sure you do your tire a few inches higher, i had to flip my tow tongue to get the trailer on, i will cut off the mounts and raise it 50 mm at work, my bad, i wanted everything low lol.
auxiliary fuel tank getting sorted, its a bit of mucking around but will be worth it.
ordered spot lights in various sizes and a small l.e.d bar to give me some decent light for night driving.
cargo barrier ordered and im mucking about with a roof basket.
thinking of painting the jimny a different colour. not sure.
not sure on the engine mods, it has no power, so im unsure of what mod i can do short of a engine swap, there is a super charger kit available for the m13 over here, but you get a "massive" 10kw gain for $6000, doesnt really seem bang for buck.
and i just dont think the engine will handle a turbo as well as cost vs payoff being worthwhile.
interested to hear other peoples opinions on what they have done to squeeze a couple more stallions out of the engine!
Most people in Oz go for the Suzuki Baleno engine conversion, which gives you a 1600 dohc engine that is a happy revver and about 20 more horsepower. Fairly straightforward conversion been done and pictorialised quite a bit. Can be done in a day.
Baleno conversion is only an option for a early jimny with a G series motor. I think the pick for a vvt jimny is the 1.6 M series motor from a swift sport. 100kw and 160nm.
true that, in australia you cant go backwards in an engine conversion, ie. you canbt put an engine in from an older series, and as im in the m13 i would need a similar engine (m15/15/18)
its to do with safety and emissions etc.
what is actually different from a m13 to a m16?
is it just the crank giving it a longer stroke? or are they different bore, crank and block?
what puts me off is the multitude of ecu faults the swap throw up as the m16 and m13 are from different vehicles/different computers.
i was looking at getting the cylinders bored out and cam work for a bit more power, and get the head ported and poillished, undecided, like i said im not really noticing the lack of power to much, i really like the fuel economy.
ozjoel wrote: what puts me off is the multitude of ecu faults the swap throw up as the m16 and m13 are from different vehicles/different computers.
You have to use the 1.3 ECU and all its sensors with the 1.6 injectors. Its possible to remap the 1.3 ECU but most people report that it works OK without any mods.
