BigJimny Store
Discuss the BigJimny Shop and Website in this section. Whats good, whats bad, whats ugly! - what would you like to see!

Jimny steering tie rod end

  • panosd
  • Topic Author
  • Visitor
  • Visitor
    Public
08 Jun 2012 13:57 #41972 by panosd
Jimny steering tie rod end was created by panosd
Hello Martin. Can you tell me if you have the track rod end?

I mean this one
[IMG


Uploaded with ImageShack.us

My car is left side drive.

How much does it costs? Postage for GR 62055 ?

Thanks a lot.

Please Log in or Create an account to join the conversation.

More
08 Jun 2012 23:31 #42040 by kirkynut
Replied by kirkynut on topic Re: Jimny steering tie rod end
I have just replaced mine with parts from the Big Jimny Shop and the steering box is in the same place and that steering arm is the same as on Right Hand Drive.

I think the part you want is the one in the Big Jimny Shop with the part number FTR5341 but it might be best to wait for Martin to confirm this before ordering.

If replacing one, you might wish to consider doing them all, as if one is worn, the others can't be far behind them!

Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0

Please Log in or Create an account to join the conversation.

  • panosd
  • Topic Author
  • Visitor
  • Visitor
    Public
09 Jun 2012 08:05 #42052 by panosd
Replied by panosd on topic Re: Jimny steering tie rod end
Thanks a lot kirkynut.

I will wait for the confirmation from martin. I have made a checking to all of them and the rear ones of the

steering bar behind the axle are still fine.

My car is left hand drive so the steering wheel bar is from the ather side. I will take a picture to see :) .

Please Log in or Create an account to join the conversation.

More
10 Jun 2012 18:59 #42139 by mlines
Replied by mlines on topic Re: Jimny steering tie rod end
Yes, they are in my shop. Although Kirkynut has told you which one it should be , you should really check the thread on the end as we have found that some cars are fitted with the rod the other way around. A simple check is to find which way the lock nut turns.

martin
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

  • panosd
  • Topic Author
  • Visitor
  • Visitor
    Public
11 Jun 2012 13:14 - 11 Jun 2012 13:15 #42167 by panosd
Replied by panosd on topic Re: Jimny steering tie rod end
Martin i found the suzuki code for this, ''48810-81a00''

so now can you teel me which one is that i need?
Last edit: 11 Jun 2012 13:15 by panosd.

Please Log in or Create an account to join the conversation.

More
14 Jun 2012 07:46 - 14 Jun 2012 07:48 #42331 by kirkynut
Replied by kirkynut on topic Re: Jimny steering tie rod end
Assuming your tie rod is the right way round you need FTR5342. This has a normal thread - clockwise to tighten, anti clockwise to loosen, so you can check by undoing it.

To get a price on the item and postage, put the item in the shopping cart with your address in the shop and it will give you a price all included. I think it still does this for overseas customers but not beingone I'm not sure!

Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Last edit: 14 Jun 2012 07:48 by kirkynut.

Please Log in or Create an account to join the conversation.

More
14 Jun 2012 09:46 #42335 by mlines
Replied by mlines on topic Re: Jimny steering tie rod end
As Kirkynut says, it should be FTR5342, but we have found the only real way to check is to look at the one you have.

And yes, you can then price it up by going through the store.

Martin
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

  • panosd
  • Topic Author
  • Visitor
  • Visitor
    Public
14 Jun 2012 16:53 #42342 by panosd
Replied by panosd on topic Re: Jimny steering tie rod end
Many thanks to both.

For pricing and postage i have already checked the shop.

Thanks again. B)

Please Log in or Create an account to join the conversation.

Time to create page: 0.139 seconds
Joomla template by a4joomla