Discuss the BigJimny Shop and Website in this section. Whats good, whats bad, whats ugly! - what would you like to see!

SJ hub spacers.

  • Sam_
  • Topic Author
  • Visitor
  • Visitor
    Public
22 May 2012 09:37 #40931 by Sam_
SJ hub spacers. was created by Sam_
Hi Martin,

Just thought I'd let you know I got the spacers you sent me at the beginning of last week and fitted them the Saturday just gone.

Thanks for sending them out so quickly much appreciated, but I thought I'd let you know they didn't fit straight away. I had to open out the holes to 9mm before I could get them to fit.

Just wondering whether they fitted before galvanizing and then the thickness of the coat is causing the holes not to line up?

Just thought you should know!

Please Log in or Create an account to join the conversation.

More
22 May 2012 10:35 #40938 by mlines
Replied by mlines on topic Re: SJ hub spacers.
Thanks, I had only checked the new batch visually against an existing one. It sounds as if there is a very slight tolerance difference.

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

  • Sam_
  • Topic Author
  • Visitor
  • Visitor
    Public
22 May 2012 13:35 #40944 by Sam_
Replied by Sam_ on topic Re: SJ hub spacers.
Yeah I think its very close, maybe next batch have the holes drilled slightly bigger? As being only a spacer it shouldn't matter if the holes are slightly bigger than the original?

Did have me baffled for a little while though!

Please Log in or Create an account to join the conversation.

More
17 Jun 2012 07:28 #42483 by robs5230
Replied by robs5230 on topic Re: SJ hub spacers.
mine came yesterday and no issues with the holes. thanks

standard jimny - for now

Please Log in or Create an account to join the conversation.

Time to create page: 0.162 seconds
Joomla template by a4joomla