BigJimny Store
Discuss the BigJimny Shop and Website in this section. Whats good, whats bad, whats ugly! - what would you like to see!

SJ Manual Hub Adapters / Bolts

  • doncarlyon
  • Topic Author
  • Visitor
  • Visitor
    Public
04 May 2011 09:34 #15854 by doncarlyon
SJ Manual Hub Adapters / Bolts was created by doncarlyon
Got them a little while ago, fitted the hubs last night... everything was very straight forward!

Cheers!

Please Log in or Create an account to join the conversation.

More
05 May 2011 15:47 #15910 by mlines
Replied by mlines on topic Re: SJ Manual Hub Adapters / Bolts
Now back in stock....

www.bigjimny.com/store/index.php/jimny-p...b-adaptors/p_15.html
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
05 May 2011 16:13 - 05 May 2011 16:14 #15911 by maverick
Replied by maverick on topic Re: SJ Manual Hub Adapters / Bolts
Martin, do you do those studs with a normal head/nut on the top, instead of a allen-key head ...

They are a serious 'b1tch' to fit as the FWH gets in the way ....

But, on the other hand, no-one is gonna steal them ... unless they've the odd hour to spare!!
Jalapeño, IISY?
Last edit: 05 May 2011 16:14 by maverick. Reason: add more text

Please Log in or Create an account to join the conversation.

  • Keefe
  • Visitor
  • Visitor
    Public
05 May 2011 16:30 #15912 by Keefe
Replied by Keefe on topic Re: SJ Manual Hub Adapters / Bolts

maverick wrote: They are a serious 'b1tch' to fit as the FWH gets in the way ....


If you remove the 'end' of the hub, you can get an allen key straight in, dead easy.

hth

K :)

Please Log in or Create an account to join the conversation.

  • doncarlyon
  • Topic Author
  • Visitor
  • Visitor
    Public
05 May 2011 16:39 #15914 by doncarlyon
Replied by doncarlyon on topic Re: SJ Manual Hub Adapters / Bolts
Yup, it took about half an hour to do the whole job. Very easy!

Please Log in or Create an account to join the conversation.

More
05 May 2011 16:46 #15916 by mlines
Replied by mlines on topic Re: SJ Manual Hub Adapters / Bolts

maverick wrote: Martin, do you do those studs with a normal head/nut on the top, instead of a allen-key head ...

They are a serious 'b1tch' to fit as the FWH gets in the way ....

But, on the other hand, no-one is gonna steal them ... unless they've the odd hour to spare!!


They are still the Hex Head Bolts, as has been said it is straight forward if you remove the end cap of the hub.

There was no specific intention/design about it, they were just the ones I had for the prototype and have been the ones I have bought ever since. If the general concensus it that they should be different then I can change, but if you can't get an Allen Key in then you are unlikely to get a socket drive in either?

Martin
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

  • Keefe
  • Visitor
  • Visitor
    Public
05 May 2011 17:41 - 05 May 2011 17:44 #15922 by Keefe
Replied by Keefe on topic Re: SJ Manual Hub Adapters / Bolts
No eBay APP ID and/or Cert ID defined in Kunena configurationMaverick,

If you don't want to take the 'end cap' off, a Ball Ended Allen key would make it easier for you.


Having said that, how often do you intend taking them off and on?

K :)
Last edit: 05 May 2011 17:44 by Keefe. Reason: insert link

Please Log in or Create an account to join the conversation.

Time to create page: 0.126 seconds
Joomla template by a4joomla