The Jimny is fitted with an ARB difflocker in the rear axle. These difflocks are operated by compressed air, therefore an air source is required. If you purchase an ARB brand compressor these have a small air tank built in that permits operation of the locker but if you want to have more air, suitable for other accessories or for inflating tyres then a large air system is required.

The previous owner installed a VIAIR air tank system combined with a T-Max compressor but only carried out a quick minimum installation.......

 

As well as the basic specification here are some pictures that are the "starting point" of my ownership.

 

So what is the first thing to do to the Jimny?....Make it mine!

The best way to do this is to add a few personalised stickers such as shown below: