BigJimnyMeet (North) 2024 (12 Jan 2024)

BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Jimny Bits rear disc hoses

Start
Prev
1
Next
End

ahtr
Topic Author
Offline
Senior Member
Registered

29 Dec 2018 22:00 #199684 by ahtr

Jimny Bits rear disc hoses was created by ahtr

Does anyone have a picture of how they've fitted the brass tee from the Jimny Bits rear brake disc conversion? Have fitted it but it just doesn't look right, seems to put the drivers side brake hose very close to the spring.

My green laner build
2003 Jimny - M16 engine - 4.16 TC - Winch - Snorkel - 30x9.5 Maxxis MT-764 tyres on 15x7 ET-7 offset wheels - 4" lift - Rear floating axles and discs

Please Log in or Create an account to join the conversation.

mlines
Offline
Administrator
Super Users
Wokingham, UK

29 Dec 2018 22:08 #199685 by mlines

Replied by mlines on topic Re:Jimny Bits rear disc hoses

Attached to the normal mounting bracket

Sent from my Pixel 2 XL using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

The following user(s) said Thank You: ahtr

Please Log in or Create an account to join the conversation.

mlines
Offline
Administrator
Super Users
Wokingham, UK

29 Dec 2018 22:11 #199686 by mlines

Replied by mlines on topic Re:Jimny Bits rear disc hoses

Then swings below the spring to a clamp

Sent from my Pixel 2 XL using Tapatalk

The following user(s) said Thank You: ahtr

Please Log in or Create an account to join the conversation.

ahtr
Topic Author
Offline
Senior Member
Registered

29 Dec 2018 22:24 #199687 by ahtr

Replied by ahtr on topic Re:Jimny Bits rear disc hoses

Thanks Martin.

Have fitted it the same way with the clip, but the hoses on mine are all over the place. Will give them a tweak tomorrow.

My green laner build
2003 Jimny - M16 engine - 4.16 TC - Winch - Snorkel - 30x9.5 Maxxis MT-764 tyres on 15x7 ET-7 offset wheels - 4" lift - Rear floating axles and discs

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.084 seconds

Search

Fast Font

BigJimnyMeet (North) 2024 (12 Jan 2024)

Jimny Bits rear disc hoses

The Legal Stuff