×
BigJimny Meet 2019 (17 May 2019)

BigJimny Meet and off-road driving day



20TH OCTOBER 2019

BOOK NOW (BOOKING CLOSES EARLY OCTOBER!!) - CLICK HERE


See HERE for details - See HERE for discussion

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Clear ecu faults

More
26 Jul 2017 13:07 #182971 by Paulig174
Clear ecu faults was created by Paulig174
Anyone know how to clear ecu faults on a 99 g13bb jimny.diag tool will not connect.ive changed the part but now I nee to clear the fault.engine wont start. Cheers

Please Log in or Create an account to join the conversation.

More
26 Jul 2017 15:09 #182973 by mlines
Replied by mlines on topic Clear ecu faults
Faults self-clear on second start-up of engine following fixing the faults.

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
28 Jul 2017 06:36 #183023 by Paulig174
Replied by Paulig174 on topic Clear ecu faults
I dont understand y it wont start then after changing the sensor.it was even running before I changed it but badly.and check engine light is on.would it be immobizer or something

Please Log in or Create an account to join the conversation.

Moderators: funkyjimnyooky_123
Time to create page: 0.057 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.