BigJimnyMeet (North) 2024 (12 Jan 2024)

BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

rear half shaft seal

Start
Prev
1
Next
End

markyp2000
Topic Author
Visitor
Public

22 Sep 2012 20:50 #48570 by markyp2000

rear half shaft seal was created by markyp2000

i have fitted to rear wheel bearing and 3 seals all on one side and every 6 months or so it keeps leaking i have 2" spacers and the only thing i can think of is that it buts more stress on the bearing but why only on one side has any one ellse come across this

Please Log in or Create an account to join the conversation.

mlines
Offline
Administrator
Super Users
Wokingham, UK

22 Sep 2012 21:02 #48572 by mlines

Replied by mlines on topic Re: rear half shaft seal

Is it the "long" side or "short" side, as in axle shaft length. I bet its the long side.

If so then I have seen this before with spacers.

Also you may have bent the axle shaft.

Sent from my HP Touch pad using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

markyp2000
Topic Author
Visitor
Public

23 Sep 2012 19:12 #48628 by markyp2000

Replied by markyp2000 on topic Re: rear half shaft seal

short shaft

Please Log in or Create an account to join the conversation.

facade
Offline
Platinum Member
Registered

23 Sep 2012 20:34 #48641 by facade

Replied by facade on topic rear half shaft seal

Make sure that the outer surface of the bearing retainer ring is as smooth as glass, as this is the surface that the seal runs on. Some of the replacement rings have a rough surface finish.

You may also find that your axle breather is blocked.

If it suddenly breaks, go back to the last thing that you did before it broke and start looking there

Please Log in or Create an account to join the conversation.

markyp2000
Topic Author
Visitor
Public

23 Sep 2012 20:40 #48644 by markyp2000

Replied by markyp2000 on topic rear half shaft seal

You may also find that your axle breather is blocked.

mmmm didnt think of that ill poke my air line up at lunch tomorrow

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.092 seconds

Search

Fast Font

BigJimnyMeet (North) 2024 (12 Jan 2024)

rear half shaft seal

The Legal Stuff