×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
et jimny steel rim
22 Sep 2012 17:10 #48549
by j999pre
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Replied by j999pre on topic et jimny steel rim
Offset
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Please Log in or Create an account to join the conversation.
22 Sep 2012 19:25 #48555
by Keefe
Replied by Keefe on topic et jimny steel rim
Please Log in or Create an account to join the conversation.
23 Sep 2012 08:18 #48581
by Paul4x4
That's hard to say where they pulled that ET5 and what rim is in question. I still believe it's ET0. Haven't measured it myself, but when car manufacturers make a list of specs of a car, they also tell what is the track width and that is measured between the wheel centers. That's why it should be measured with ET0 rims to be correct...
Replied by Paul4x4 on topic et jimny steel rim
Keefe wrote: Jimny offset: 5
www.wheel-fitment.com/car/Suzuki/Jimny/
www.google.co.uk/search?q=wheel+offset&h...sAQ&biw=1024&bih=481
K
That's hard to say where they pulled that ET5 and what rim is in question. I still believe it's ET0. Haven't measured it myself, but when car manufacturers make a list of specs of a car, they also tell what is the track width and that is measured between the wheel centers. That's why it should be measured with ET0 rims to be correct...
Please Log in or Create an account to join the conversation.
Time to create page: 0.090 seconds