BigJimnyMeet (North) 2024 (12 Jan 2024)

BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

Third body mount in front of rear wheel

Start
Prev
1
Next
End

Jim2004
Topic Author
Offline
New Member
Registered

25 Dec 2023 13:17 #253068 by Jim2004

Third body mount in front of rear wheel was created by Jim2004

Hello everyone
Fitting rock sliders, and have undone the front body mounts no problem, nut came off fine, however gone to undo the third mount point in front of rear wheel and instead of the nut coming off it seems like it’s winding the whole bolt out, can’t see how to get at this bolt from inside floor pan, thinking if I just keep winding it out it will cause a problem?. Any suggestions welcome
thanks

Please Log in or Create an account to join the conversation.

Lambert
Offline
Moderator
Registered
The quickest Jimny in Harrogate...(that I own)

25 Dec 2023 13:54 #253070 by Lambert

Replied by Lambert on topic Third body mount in front of rear wheel

I think they are all captive bolts. There should be a reduced area on the open end that you should be able to grip with self locking pliers and use a ring spanner or drive through socket to get the nut.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

LesNewell
Offline
Elite Member
Registered

25 Dec 2023 15:38 #253071 by LesNewell

Replied by LesNewell on topic Third body mount in front of rear wheel

As Lambert says, the bolt should be captive. If it is just spinning, that means the mount has rusted badly enough that the bolt is no longer attached. The mount may not look too bad from the outside now but you will probably need to do some surgery in the next year or so.

Please Log in or Create an account to join the conversation.

Jim2004
Topic Author
Offline
New Member
Registered

25 Dec 2023 16:11 #253072 by Jim2004

Replied by Jim2004 on topic Third body mount in front of rear wheel

Yes I thought about that or possibly just cutting the nut off and replacing with two new nuts,
I could unwind the whole bolt using the nut but then it went tight and didn’t want to force it so tightened it back up against rubber mount and it tightened back up fine.
I might try some heat on nut too failing that I’ll cut it off

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.091 seconds

Search

Fast Font

BigJimnyMeet (North) 2024 (12 Jan 2024)

Third body mount in front of rear wheel

The Legal Stuff