BigJimny Meet - 2020 (01 Nov 2019)

Its the big one! The 50th Anniversary of the Jimny.

17th May 2020

Parkwood (Tong - near Leeds)

Booking will open soon - cost per vehicle is planned to be £35

Event details are HERE

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the


16 Mar 2019 16:29 #204655 by RogersJimmy
ENGINE OIL LEAK was created by RogersJimmy
2001 model Jimny.

Today I noticed an oil leak from the rear end of the engine which appears to come from towards the top, and has covered the back of the crankcase and the gearbox.
It looks as if it might be from the aluminium rocker cover. It looks easy to replace the gasket here, but I wondered if this is a common thing and if I should be looking elsewhere as well.
All advice gratefully received - thank you.

Please Log in or Create an account to join the conversation.

17 Mar 2019 06:51 #204673 by kirkynut
Replied by kirkynut on topic ENGINE OIL LEAK
I've read a few posts about the cam cover gasket leaking.


The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
The following user(s) said Thank You: RogersJimmy

Please Log in or Create an account to join the conversation.

24 Mar 2019 13:02 #205001 by RogersJimmy
Replied by RogersJimmy on topic ENGINE OIL LEAK
Reporting back!

I have changed the cam cover gasket for a new one and used Red Hermetite for good measure. Fingers crossed, all ok so far.

Please Log in or Create an account to join the conversation.

Time to create page: 0.401 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.