A section for Vitara and SJ owners.
If you have not yet upgraded to a Jimny then you can discuss your current Suzuki 4x4 here!
If you have not yet upgraded to a Jimny then you can discuss your current Suzuki 4x4 here!
Grand Vitara bearing support
- Muddymoss
- Topic Author
- Visitor
-
Public
23 Jan 2016 15:19 - 23 Jan 2016 15:20 #160934
by X8GGY
Replied by X8GGY on topic Grand Vitara bearing support
Hundreds...
LOL, I sell them all around the world...
Dave, Bits4Vits
Edit : But you probably won't get much response on a Jimny biased forum... :whistle:
LOL, I sell them all around the world...
Dave, Bits4Vits
Edit : But you probably won't get much response on a Jimny biased forum... :whistle:
Last edit: 23 Jan 2016 15:20 by X8GGY.
Please Log in or Create an account to join the conversation.
- Muddymoss
- Topic Author
- Visitor
-
Public
23 Jan 2016 18:55 #160975
by X8GGY
Thanks Rhinoman
Replied by X8GGY on topic Grand Vitara bearing support
Rhinoman wrote: There should have been some sort of bearing in there from the start, the shaft surface can wear quite badly without it. Its so cheap its not worth running without one.
Thanks Rhinoman
Please Log in or Create an account to join the conversation.
23 Jan 2016 18:57 #160976
by X8GGY
Ah, no, sorry... I'm not selling lift kits at the moment
You'll be wanting
JimnyBits
for the lift kit...
Prop Spacers are in transit at the moment though... a batch are winging their way over from Rockwatt Engineering as we 'speak'...
Dave
Replied by X8GGY on topic Grand Vitara bearing support
Muddymoss wrote: Thanks, I've seen them on your site. Do you sell the 2" lift kit for a 53 plate Grand Vitara swb petrol? Also the 12.5mm propshaft spacer? Thanks
Paul
Ah, no, sorry... I'm not selling lift kits at the moment
You'll be wanting
JimnyBits
for the lift kit...Prop Spacers are in transit at the moment though... a batch are winging their way over from Rockwatt Engineering as we 'speak'...
Dave
Please Log in or Create an account to join the conversation.
Time to create page: 0.207 seconds