A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Differential ratio
06 Feb 2024 17:10 #254078
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Differential ratio
Count the teeth.
The ratio is number of crownwheel teeth / number of pinion teeth.
They are not marked on the outside.
There is no guarantee that your current differentials are "correct" for the car either, unless you had it from brand new.
The ratio is number of crownwheel teeth / number of pinion teeth.
They are not marked on the outside.
There is no guarantee that your current differentials are "correct" for the car either, unless you had it from brand new.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
- rogerzilla
- Visitor
-
Public
07 Feb 2024 13:34 - 07 Feb 2024 13:41 #254103
by rogerzilla
Replied by rogerzilla on topic Differential ratio
From the 2014 brochure. The auto is noticeably higher-geared in top.
(Sorry, the forum software munges the image but if you can't read it, manual final drive is 4.3 and auto final drive is 4.090 BUT 4th in an auto is a significant overdrive whereas 5th in a manual is direct drive).
(Sorry, the forum software munges the image but if you can't read it, manual final drive is 4.3 and auto final drive is 4.090 BUT 4th in an auto is a significant overdrive whereas 5th in a manual is direct drive).
Last edit: 07 Feb 2024 13:41 by rogerzilla.
Please Log in or Create an account to join the conversation.
Time to create page: 0.125 seconds