A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Anyone know how to fix this

spookyandroid
Topic Author
New Member
Public

10 Jun 2022 10:32 #243658 by spookyandroid

Anyone know how to fix this was created by spookyandroid

Trying to fit a tow bar. Small prob.

Please Log in or Create an account to join the conversation.

DrRobin
Offline
Platinum Member
Registered
Newbie in Northumberland

10 Jun 2022 13:08 #243659 by DrRobin

Replied by DrRobin on topic Anyone know how to fix this

A very large hammer?
Or possibly a blow torch and hammer?
That or cut it off and weld a new section on?

2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog

The following user(s) said Thank You: spookyandroid

Please Log in or Create an account to join the conversation.

spookyandroid
Topic Author
New Member
Public

10 Jun 2022 14:38 #243661 by spookyandroid

Replied by spookyandroid on topic Anyone know how to fix this

A very very large crowbar and a lot of grunting got it moved enough to mount towbar. Yay

Please Log in or Create an account to join the conversation.

DrRobin
Offline
Platinum Member
Registered
Newbie in Northumberland

11 Jun 2022 08:46 #243668 by DrRobin

Replied by DrRobin on topic Anyone know how to fix this

Good news, well done.

There are times when the use of a ‘persuader’ is the only thing to get the job done.

It looks like someone might have used the recovery point to try to free something stuck in a hole and bent it downwards.

Robin

2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog

Please Log in or Create an account to join the conversation.

Time to create page: 0.411 seconds

Anyone know how to fix this

Events Menu