× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

BOLT

More
24 Apr 2022 09:24 #243112 by gv42
BOLT was created by gv42
The size of the caliper mount bolt 

Please Log in or Create an account to join the conversation.

More
24 Apr 2022 09:58 #243113 by Scimike
Replied by Scimike on topic BOLT
Part 09117-12012

It's used on a number of Suzuki vehicles for various functions. interestingly the price changes depending upon the Suzuki stated function, even though the part number is the same. - Suzuki Carry bolt = £1.20 , Suzuki Jimny caliper bolt = £5 - marketing at its best.

The web suggests M12x32, can't determine if it's 1.25 (most likely) or 1.5 pitch. 

Yokohama Geolanders, Sony head unit, NAUTILUS Air Horn, DRL conversion, Rear cargo space, Elvis Bobblehead, transfer Guard, Indian hanging Elephant, Koni Heavy track dampers, Custom SS exhaust, Voodoo Doll, Adventure Rack with LED ight bar, vintage ERIBA caravan usually attached (yes it's slow)

Please Log in or Create an account to join the conversation.

More
24 Apr 2022 10:05 #243115 by gv42
Replied by gv42 on topic BOLT
Thanks Scimike

Please Log in or Create an account to join the conversation.

More
24 Apr 2022 10:44 - 24 Apr 2022 10:51 #243118 by Dirtbird
Replied by Dirtbird on topic BOLT
M12x32, yes pitch don't know by both as schmike suggests . 

Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.
Last edit: 24 Apr 2022 10:51 by Dirtbird.

Please Log in or Create an account to join the conversation.

More
24 Apr 2022 15:38 #243125 by X8GGY
Replied by X8GGY on topic BOLT
Standard is an M12 x 28mm with a flange head

So I sell them as M12 x 30mm with a spring washer, yes, 1.25mm “metric fine” pitch thread…
 

Please Log in or Create an account to join the conversation.

More
24 Apr 2022 17:37 #243131 by yakuza
Replied by yakuza on topic BOLT
A toyota Corolla Verso (or something) broke down right outside my garage once few years back. The guy jacked up the car and took the wheel off and stood there scratching his head. I went over to him and he said he had the car in a garage few weeks back and now the caliper had fell off. Seems the garage forgot to tighten the bolts or something. I just went into my garage and picked two SJ caliper bolts from the bucket, and they fit perfectly. He was very grateful and drove off :)
Same caliper bracket and bolts on the Jimny as the SJ as well.

However, please do not experiment with brake parts, buy new!

2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.

Please Log in or Create an account to join the conversation.

More
25 Apr 2022 06:53 #243138 by gv42
Replied by gv42 on topic BOLT
Thank you All , so I got some new one's from Sims Suzuki Parts a set of 4 for £20-00p .

Please Log in or Create an account to join the conversation.

More
25 Apr 2022 09:05 - 25 Apr 2022 09:05 #243141 by X8GGY
Replied by X8GGY on topic BOLT
I’ll have to put my £5.95 full set of four including postage up a bit then?! 
Last edit: 25 Apr 2022 09:05 by X8GGY.

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
25 Apr 2022 09:29 #243143 by Lambert
Replied by Lambert on topic BOLT
5 quid each? I paid half that from my local dealer.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.

Please Log in or Create an account to join the conversation.

Time to create page: 0.157 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.