×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

RADIO UNIT IN THE JIMNY JB74 REVERSING CAMERA PINOUT

  • digitaldvd
  • Topic Author
  • Visitor
  • Visitor
    Public
11 Jan 2021 05:31 - 11 Jan 2021 05:32 #231679 by digitaldvd
Hi all
is anyone able to give the pinout detail off the green socket on the back of the radio for the reversing camera eg voltage input video input signal input etc please see photo attached
Attachments:
Last edit: 11 Jan 2021 05:32 by digitaldvd.

Please Log in or Create an account to join the conversation.

More
11 Jan 2021 08:49 - 11 Jan 2021 08:50 #231681 by mlines
See the picture. Whilst they do not give the signals, I believe it follows the "standard" that Yellow is the video signal and Black is ground and red is power.



Sent from my Pixel 2 XL using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Last edit: 11 Jan 2021 08:50 by mlines.

Please Log in or Create an account to join the conversation.

  • digitaldvd
  • Topic Author
  • Visitor
  • Visitor
    Public
11 Jan 2021 20:50 #231709 by digitaldvd
Thanks for the info :)

Please Log in or Create an account to join the conversation.

More
12 Jan 2021 11:33 #231725 by Grim Reaper
I bought a lead off ebay or ali express for around £6, it has ground wires on pins 1 & 4, positive sense wire is pin 2, video signal is pin 3, there's nothing connected on pin 5
Attachments:

Please Log in or Create an account to join the conversation.

  • digitaldvd
  • Topic Author
  • Visitor
  • Visitor
    Public
12 Jan 2021 21:30 #231755 by digitaldvd
Thanks for the info yes i have a cable on the way also have installed camera,total cost $24nz dollars :) and no need to remove back seat :)

Please Log in or Create an account to join the conversation.

Time to create page: 0.122 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.