×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Rattling Dashboard on a Gen 3
Less
More
- Posts: 18
- Thank you received: 2
- Points: 102.00
09 Jun 2020 11:00 #223408
by Talkstar
-H56A, JB43W, NCP19, UCF31, Z50J2
-The Pajero is like a Range Rover. Equally capable in the mud but with a slightly less attractive woman by your side / Tanner Faust
Replied by Talkstar on topic Rattling Dashboard on a Gen 3
Checked mine as well. I have had a low rattling noise for almost a year. I even insulated my dashboard from inside with STP noise killer. Drivers side were completely loose, middle tight and left side a half turn loose. Hopefully this did the trick.
-H56A, JB43W, NCP19, UCF31, Z50J2
-The Pajero is like a Range Rover. Equally capable in the mud but with a slightly less attractive woman by your side / Tanner Faust
The following user(s) said Thank You: TillymintDLG
Please Log in or Create an account to join the conversation.
- mark a franklin
- Offline
- New Member
-
Registered
Less
More
- Posts: 4
- Thank you received: 0
- Points: 9.00
-
10 Nov 2022 16:05 #245876
by mark a franklin
Replied by mark a franklin on topic Rattling Dashboard on a Gen 3
Thanks for that ,great pics
I had 3 loses screws
I had 3 loses screws
Please Log in or Create an account to join the conversation.
11 Nov 2022 21:14 #245901
by redoregan
Replied by redoregan on topic Rattling Dashboard on a Gen 3
Haha I thought it was just my Jim had this issue. Cheers for the tips! I'll break out the screwdriver tomorry.
Please Log in or Create an account to join the conversation.
Time to create page: 0.084 seconds