A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Alternator and power steering belt size?
- Keirravn
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
10 Mar 2020 22:08 #219705
by Keirravn
Alternator and power steering belt size? was created by Keirravn
Searched till my finger were numb but can't find an answer and wondered if anyone might know, what belts do I need?
It's an alternator belt and a power steering belt. 2001 m13aa non a/c model.
Thanks
Sent from my CPH1951 using Tapatalk
It's an alternator belt and a power steering belt. 2001 m13aa non a/c model.
Thanks

Sent from my CPH1951 using Tapatalk
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2989
- Thank you received: 673
10 Mar 2020 23:18 #219708
by jackonlyjack
Replied by jackonlyjack on topic Alternator and power steering belt size?
I run with 2 x 4PK 850
Make i always use Gates belts(not that it matres)
Make i always use Gates belts(not that it matres)
The following user(s) said Thank You: Keirravn
Please Log in or Create an account to join the conversation.
11 Mar 2020 09:49 #219720
by bryn
Replied by bryn on topic Alternator and power steering belt size?
Please Log in or Create an account to join the conversation.
- Keirravn
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
11 Mar 2020 10:06 #219721
by Keirravn
Sent from my CPH1951 using Tapatalk
Replied by Keirravn on topic Re:Alternator and power steering belt size?
Ye been there but I couldn't actually figure out the belt sizes from that, am I missing something?bryn wrote: www.bigjimny.com/mediawiki/index.php?title=Drive_belts
bryn
Sent from my CPH1951 using Tapatalk
Please Log in or Create an account to join the conversation.
- Keirravn
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
11 Mar 2020 10:07 #219722
by Keirravn
The best guess/info I have suggest I need an 850 for the alternator and 815 for the power steering
Sent from my CPH1951 using Tapatalk
Replied by Keirravn on topic Re:Alternator and power steering belt size?
Is that with or without ac?jackonlyjack wrote: I run with 2 x 4PK 850
Make i always use Gates belts(not that it matres)
The best guess/info I have suggest I need an 850 for the alternator and 815 for the power steering
Sent from my CPH1951 using Tapatalk
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2989
- Thank you received: 673
11 Mar 2020 10:11 #219724
by jackonlyjack
Replied by jackonlyjack on topic Re:Alternator and power steering belt size?
Yes no air con
I think it's 835 for power steering
BUT i could not get the 835 on
So that's why i went with 2x 850's
I think it's 835 for power steering
BUT i could not get the 835 on
So that's why i went with 2x 850's
The following user(s) said Thank You: Keirravn
Please Log in or Create an account to join the conversation.
Time to create page: 0.154 seconds