× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Help

Start
Prev
1
Next
End

steve001
Topic Author
Offline
Senior Member
Registered

15 Oct 2016 05:50 #173557 by steve001

Help was created by steve001

What's happening here is it a leak

Please Log in or Create an account to join the conversation.

MWells
Offline
Elite Member
Registered

15 Oct 2016 05:56 #173558 by MWells

Replied by MWells on topic Help

Axel oil seal is leaking probably due to worn king pin bearings. It's a common problem. Parts can be purchased from the big jimny shop and there is also a very good 'how to' guide on here as well.

Jimnyless

Please Log in or Create an account to join the conversation.

mlines
Offline
Administrator
Super Users
Wokingham, UK

15 Oct 2016 06:30 #173559 by mlines

Replied by mlines on topic Help

Information here: www.bigjimny.com/mediawiki/index.php/Kingpin_Bearing_Change

Parts here: www.bigjimny.com/store/jimny-parts/servi...rings-and-seals.html

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

The following user(s) said Thank You: gusthegorilla

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.117 seconds

Search

Fast Font

Help

Attachments:

The Legal Stuff