× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Right way to do a 3" suspension lift

  • boybi
  • Topic Author
  • Visitor
  • Visitor
    Public
20 Apr 2016 11:12 #165522 by boybi
What is the right way (or best way) to lift a Jimny by 3 inches?

What are the parts needed to be replaced or added?

Please Log in or Create an account to join the conversation.

More
20 Apr 2016 13:52 #165524 by darthloachie
Hi
To do a 3" suspension lift properly you will need
4x +3" Coil springs
4x +3" shock absorbers
4x HD +3" castor corrected radius arms
2x HD adjustable panhard rods
1x set of extended brake hoses
1x 25mm front prop spacer
1x Rear brake balance correcting bracket

Please Log in or Create an account to join the conversation.

  • boybi
  • Topic Author
  • Visitor
  • Visitor
    Public
20 Apr 2016 15:55 #165526 by boybi
Replied by boybi on topic Right way to do a 3" suspension lift
What's a brake balance correcting bracket?

Please Log in or Create an account to join the conversation.

More
20 Apr 2016 16:13 #165529 by Mr.m.y

Please Log in or Create an account to join the conversation.

More
20 Apr 2016 21:28 #165545 by TomDK

boybi wrote: What is the right way (or best way) to lift a Jimny by 3 inches?

What are the parts needed to be replaced or added?


Right way in my opinion is figuring out what your needs are. is it a standard jimny or is it loaded up with winches, cages, batteries and what not. Also, is it just for looks or for competition, greenlaning?

+3" Trail Master. Fox 8.0" R/R shocks. ORA HD winchbumper. Warn M8274 Ox-motor + Hellfire gears, Delta-Tek mainshaft and freespool, overvolted. 33/9.5 R16 Silverstone Extreme. 5.14:1 ratio SJ transferbox in RW cradle. OMP rollcage.

Please Log in or Create an account to join the conversation.

  • boybi
  • Topic Author
  • Visitor
  • Visitor
    Public
21 Apr 2016 02:08 #165558 by boybi
Replied by boybi on topic Right way to do a 3" suspension lift
Standard Jimny with winch for occassional offroading during weekends. Definitely not for competition.

Please Log in or Create an account to join the conversation.

Time to create page: 0.107 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.