×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Panel Clips
- Blackpearl
- Topic Author
- Visitor
-
Public
01 Mar 2014 16:59 - 01 Mar 2014 17:02 #106666
by Blackpearl
I have lost some of the plastic retainer clips from my 2001 soft top Jimny wheel arch and panel . According to the internet the part number is 09409-07332.
However I have removed one and it looks nothing like that part number.
I am hopefully attaching a photo of the one I removed. I have searched the internet but cannot find that one. Any ideas please or have the wrong clips been fitted to my wheel arch and body pane just behind the passenger door.
Panel Clips was created by Blackpearl
I have lost some of the plastic retainer clips from my 2001 soft top Jimny wheel arch and panel . According to the internet the part number is 09409-07332.
However I have removed one and it looks nothing like that part number.
I am hopefully attaching a photo of the one I removed. I have searched the internet but cannot find that one. Any ideas please or have the wrong clips been fitted to my wheel arch and body pane just behind the passenger door.
Last edit: 01 Mar 2014 17:02 by Blackpearl. Reason: Photo ot uploaded
Please Log in or Create an account to join the conversation.
08 Mar 2014 18:20 #107737
by zerez
Replied by zerez on topic Panel Clips
No eBay APP ID and/or Cert ID defined in Kunena configurationI have similar problem and need few clips.
I found a Grand Vitara clips in ebay that fits into 10.5 mm hole.
Anyone tried a Grand Vitara clips on Jimny?
I found a Grand Vitara clips in ebay that fits into 10.5 mm hole.
Anyone tried a Grand Vitara clips on Jimny?
Please Log in or Create an account to join the conversation.
- meathumper
- Visitor
-
Public
08 Mar 2014 19:04 #107740
by meathumper
Replied by meathumper on topic Panel Clips
The one you removed is the correct one, I need some too if you find any.
Please Log in or Create an account to join the conversation.
Time to create page: 0.085 seconds