A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Breaking a tyre bead
- helijohn
- Topic Author
- Visitor
-
Public
30 Jul 2013 18:38 #78621
by helijohn
Breaking a tyre bead was created by helijohn
What sort of force is needed to break the bead of a tyre on a rim, Jimny that is not Cat. 
Please Log in or Create an account to join the conversation.
30 Jul 2013 21:43 #78630
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Breaking a tyre bead
In The Olden Days I used to drive over the tyre close to the rim, took a few goes usually.
I have seen a curved foot for the hi-lift that is supposed to pop the tyre off if you hook the jack under the front bumper of a defender and lift it off the floor.
Nowadays I take them to a tyre fitter and get them changed over.
I have seen a curved foot for the hi-lift that is supposed to pop the tyre off if you hook the jack under the front bumper of a defender and lift it off the floor.
Nowadays I take them to a tyre fitter and get them changed over.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
- helijohn
- Topic Author
- Visitor
-
Public
- helijohn
- Topic Author
- Visitor
-
Public
- supergaz
- Visitor
-
Public
Time to create page: 0.153 seconds