×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now closed at 148 vehicles!!!



Looking forward to seeing everyone there

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Special Tool for Hubs

More
26 Dec 2009 14:23 #1696 by mad4x4
Special Tool for Hubs was created by mad4x4
Any one know where I can get the tool to slacken the net inside the HUB nut with about 12 holes in it.

Please Log in or Create an account to join the conversation.

More
26 Dec 2009 16:33 #1699 by mlines
Replied by mlines on topic Re:Special Tool for Hubs
Bits4vits sells them, www.bits4vits.co.uk (but I think he is on Christmas break_

If you are in the South East I have one you could borrow


Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
26 Dec 2009 16:36 #1700 by mlines
Replied by mlines on topic Re:Special Tool for Hubs
But your in Scotland, of course.

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
26 Dec 2009 17:07 #1701 by Garry
Replied by Garry on topic Re:Special Tool for Hubs
where are you based Andy? I have one here, im in Ayrshire on the west coast

i got one of Dave from bits4vits a few weeks back

this the tool you need

Please Log in or Create an account to join the conversation.

More
30 Dec 2009 08:32 #1730 by JIMNY EXTREME 4X4
hmmm my 15 year old son made one up out of a piece of steel rod with a cross section and four blods all fabbed together took him 10 mins


JIMNY EXTREME 4X4
Jimnys should come standard with yota diffs and 35's

Please Log in or Create an account to join the conversation.

More
30 Dec 2009 09:20 #1731 by mlines
Replied by mlines on topic Re:Special Tool for Hubs
I made two or three variants, none of which worked - they always sheared the bolts in half.

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
31 Dec 2009 09:31 #1735 by mad4x4
Replied by mad4x4 on topic Re:Special Tool for Hubs
I tried the same made up a tool and al I did was break the "nipples" off the end.

VitBitz tool turn up this morning do - GAME ON !

Please Log in or Create an account to join the conversation.

Time to create page: 0.140 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.