×
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Roof bar feet painting
02 Sep 2024 07:18 #257403
by yakuza
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Replied by yakuza on topic Roof bar feet painting
A dabbing / tapping motion with the tip of the brush can make for a pretty OK finish of the coating.
It is a bit like when doing house repairs or upgrades, there is allways the two alternatives:
- 1 Lower your standards.
- 2 Move out.
Mostly UV as you say so i guess any paint would do compared to the other.
It is a bit like when doing house repairs or upgrades, there is allways the two alternatives:
- 1 Lower your standards.
- 2 Move out.
Mostly UV as you say so i guess any paint would do compared to the other.
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Please Log in or Create an account to join the conversation.
Time to create page: 0.086 seconds