A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Dose anyone know how the power door locks work on the new jimny
Do the work of Can cummunication or 12v signal
I had a look at my drivers side lock and it has 5 wires coming out of it i had assumed 2 for the lock motor a commmon and a contact for lock and unlock
I am looking for the signal sent back to the BCM from the lock and unlock
Black - ground
Red - Unlock signal to BCM (ground)
Purple - Lock signal to BCM (ground)
Beige - Lock motor
Light blue - Lock motor
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
I assume the bcm looks for other conditions as well to ensure its a valid request.
Sent from my Pixel 2 XL using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
logo.
